Creating a Vintage Style Paint by Number Pattern in Painter 12

My finished pattern

One of Spoonflower's upcoming design challenges is to create a repeating pattern that looks like a vintage paint-by-number kit, the type that were popular in the 1950s and 60s. The design brief on the Spoonflower site states, "While your repeating design may take a bit longer to design than a traditional paint-by-numbers kit, it should capture the iconic styles found in the beginner-friendly technique: full opacity, crisp solid line work, clearly defined areas of color and a simplified take on your subject matter." The brief goes on to state, "Please remember to color your design in fully and leave the black and white only designs for our coloring book challenges!"

Animals and landscapes were popular themes in paint-by-number kits. I remember having a couple of paint-by-number kits when I was a kid and as I recall, one of them was a portrait of a horse's head.

Before designing my pattern, I decided to get some inspiration by googling "paint-by-number." I saved a few that I liked, including one of a group of flamingoes. For some reason flamingoes were popular subjects of these kits, possibly because they tied in with the 1950s love for exotica that had its aural equivalent in the records put out by composers like Martin Denny and Les Baxter.

vintage paint-by-number image found using Google

After deciding that flamingoes would be the perfect choice for my paint-by-number pattern, I next googled images of flamingoes. After saving a few photos, it was time to get started. For this type of pattern, I knew I wanted my pattern to have a painterly look so I decided to use Corel Painter (I have an older version which is Painter 12). You could probably achieve a similar look in Photoshop, but I've been using Painter for a long time and I'm more comfortable with its brushes. I also like it's wrap around pattern feature.

In this tutorial, I will explain how I created my pattern in Painter 12, but if you don't use Painter (and I don't think too many people do, at least compared to those who use Photoshop), you can skip to the end of this tutorial to see how I built up my pattern. Click on any image to see it larger.

To create a repeating pattern in Painter, one first needs to set up a canvas. You do this pretty much the same as you would in any program by going to File in the menu and selecting New. That will open up a dialogue window that allows you to input your size and resolution. Since Painter is a memory hog, and I knew I wanted this to be the size of a fabric fat quarter (18 x 21 inches) I made the resolution at 150 dpi, which is also the resolution that Spoonflower suggests for uploading to their site.

Once you have a canvas open, you can either begin to sketch or you can immediately set up the pattern feature. If you start to sketch before setting up the pattern feature, you won't get the wrap around effect when you reach an edge. It doesn't matter though, because you can "Capture" a pattern even if you have a blank canvas. The important thing is, when you use the "Capture" pattern command, you have to make sure you only have one layer. The base layer in Painter will show up as "Canvas" in the Layers window. If you have any other layers in addition to the "Canvas" layer, than the "Capture" pattern feature won't work. But don't worry, once you've "Captured" your image (or blank canvas) and reopened it to start work on your pattern, you can add more layers.

So, to set up the pattern feature, you need to make sure the Patterns panel/window is open. To do this, you go to "Window" in the menu and then scroll down to "Media Control Panels" and then select "Patterns." That will open up a panel that looks like what you see below.

Patterns panel in Corel Painter 12

You're next step is to capture your canvas. You do this by going to "Select" in the Menu and choosing "All," or you can use a keyboard shortcut (on a Mac it's Command A). Once your canvas is selected, go to the drop down menu in the upper right corner of the Patterns panel (see red circle in the below screen shot).

Go to drop down menu in Patterns Panel

Choose Capture Pattern

In the menu that opens up, there are a number of choices. The one you need to set up the pattern wrap around is "Capture Pattern..." I actually don't know what "Define Pattern" is for. I never use it. I've never used "Make Fractal Pattern" either. For this tutorial, all you need to worry about is the "Capture Pattern" feature.

Once you have chosen "Capture Pattern," you will see this dialogue box.

This is where you can name your pattern and decide how you want it to repeat. For my Flamingo Paint-by-Number pattern, I wanted it to be a "half-drop" pattern so I selected Vertical Shift and moved the slider to 50%. If you want a basic repeat, then you would select "Rectangular Tile" and leave the slider at 0. If you have already sketched on your canvas, then you will see your sketch in the Preview window. In this example, I captured a blank canvas so the preview window is blank.

Once you have made your selections, you can click OK. Once you click okay, Painter will process your new pattern and send it to the Pattern library. While it's doing this, you will get the spinning beach ball for a couple of minutes. Once the spinning beach ball goes away, you can begin to work on your pattern, but there is one last step you need to do. After the spinning beach ball disappears, CLOSE your open canvas (the one you selected earlier to capture) and then go back to the drop down menu in the Patterns panel. This time select the "Check out pattern" selection.

This will open up your canvas again, but this time it will have the working pattern wrap around feature that allows you to draw off of one edge and have your line continue on the opposite edge. When you select "Check Out Pattern," Painter will always open the most recent pattern that you captured, but once you have built up a library of patterns you can select another pattern to open by selecting the small arrow in the little thumbnail image to the upper right of the Pattern panels preview window, but that's getting ahead of myself and something you don't need to worry about for this tutorial.

Now that I have a canvas that has the working pattern wrap around, I can begin to sketch. For my flamingo pattern, I added in some of the photo reference that I found so that I could easily draw my flamingoes. I put the photos on a separate layer and lowered their opacity so that I could easily see my pencil lines.

Sketch with photo reference visible on a separate layer

After I had my sketch completed, I checked out how the repeat worked. I did this by saving the file as a photoshop file and then, after opening it in photoshop, I created a large photoshop file (30 x 40 inches) and cut and pasted my 18 x 21 inch Painter file into that new canvas. I then duplicated it several times and lined it up so the edges matched. I could have also checked the repeat in Painter, but it would have meant flattening my image and Capturing the canvas again, waiting for the spinning beach ball to disappear, etc. I have found it's faster to just save my work periodically as a photoshop file and go to Photoshop to check the repeat. By the way, that brings me to a very IMPORTANT bit of information - when working in Painter, for the pattern feature to remain functional, before you ever close your work, you need to save the file as a native Painter file which is called a 'rif' file. If you were to save your work as a photoshop file, then close the file in painter and then try to reopen the photoshop file in Painter, the pattern function would no longer work. So make sure you save your file as a "rif" file before closing your canvas.

Here's how the sketch looked repeated in Photoshop

Once I liked how the repeat worked, it was time to start adding color. Back in Painter, I opened up the Flamingo paint-by-number image I found on Google and used the eye dropper tool to sample some of the colors. The number of colors used in most paint-by-number kits were limited and except for the darker colors seemed to be somewhat low in saturation. I don't think I've ever seen a vintage paint-by-number kit that used neon colors. The colors always seemed to have a sort of milky look to them. By sampling the colors from a vintage image, I was able to get some of that vintage color look into my pattern.

I began by blocking in my colors very roughly, not caring whether or not I was going over the lines. After I had most of the canvas covered in colors, I checked again how the repeat was looking.

At this point I decided to move two of the baby flamingoes over closer to the nest and to add another adult flamingo that would be looking down at them.

I moved two of the babies and added another adult

I continued to add color. In the early stages, I had several layers. A separate pencil sketch layer for the flamingoes, another sketch layer for the trees and plants and then three different layers for the colors - one for the flamingoes, one for the water and another for the plants.

screen shot showing the various layers

Almost finished with the coloring

Paint-by-number images were known for their flat areas of color. There was no blending of colors, any shading was done by adding a darker color next to a lighter color. Since these kits came with a pre-drawn image, created as an outline with each color done as a separate outlined area containing a number corresponding to a color, there was little in the way of fine details in these paintings. Keeping that in mind, I tried to make my color areas somewhat broad. I tried not to use fine lines, although I do have a few that might have stretched the limit of what you would have found in an actual paint-by-number kit. Also, these paintings tended to look somewhat "blobby." It was hard to place one color up next to another without painting over the adjacent color so often the edges were squiggly and somewhat rough. Knowing this, helped free me up to not be too precise in my coloring. The shapes were often simple, which was another important factor to remember as I colored in my image.

As I got closer to finishing, I eventually combined the layers that had my tree and plant colors with the layer containing the water and sky. Doing this helped force me to keep my shapes and coloring somewhat simple.

In conclusion, to create a faux paint-by-number, do some research of actual vintage paintings, decide on your subject, sample colors from a vintage image, keep your color areas broad and flat and don't worry about your edges being precise. All of these things will help give your image a vintage feel.

My finished pattern which works as a half-drop repeat

The finished pattern shown as a repeat

Evolution of a Surface Pattern - Calculating the Moon

The finished pattern, "Calculating the Moon"

Back in December I created a pattern, as I do almost weekly, for one of Spoonflower’s design challenges. In this posting, I’m not going to go into the technical how-to aspects of how I created the repeat for this surface pattern but instead I will explore how I came up with the idea for my design and how it evolved.

For those of you who might be unfamiliar with it, Spoonflower is a company that prints designs on fabric, wallpaper and gift wrap. Their online website allows designers to upload their own designs for printing on these surfaces and then to sell the designs in their own shops. Each time a purchase is made, the designer receives a 10% royalty of the total purchase. Spoonflower handles the printing and shipping of all the products ordered. To encourage designers to upload to the site, they host a weekly challenge where they provide a theme to inspire creativity for designers.

For the design I’m writing about in this posting, the challenge was to celebrate the 50th anniversary of the 1st Moon landing. Normally Spoonflower gives the winner of the weekly challenge a $200 credit in Spoondollars which can be used to make purchases on the site. Once in a while though they have a corporate sponsor who offers up additional prizes or licensing deals. For this challenge the sponsor was the company Princess Awesome who makes a clothing line for young girls. According to the Princess Awesome website, they believe “it is crucial that girls have access to clothes that tell them that they can be and do anything…Princess Awesome is a company founded by women - mothers - who want girls to be able to express themselves through their clothing. We are committed to making clothes that girls want to wear, and that parents want to see on their daughters.” Their emphasis is on the sciences and topics (dinosaurs, rockets, robots) that in the past have been thought of as more geared for boys. For this challenge, Princess Awesome was offering a licensing deal worth $500 to the first place winner.

1961 Life magazine image that inspired my design

I’ll tell you right off the bat, I didn’t win this contest, but I did come in second place. It was a close race, if I had received just 7 or 8 more votes I would have won the prize, but with so many wonderful entries, I was honored to be in second place.

Before I began designing, I did a Google search of the 1st moon landing. My search results came up with loads of imagery of astronauts on the moon, the moon lander, the rockets that carried the lunar module, etc. None of what I was finding really sparked my imagination, until I came upon an unusual image from Life magazine that showed a group of male NASA mathematicians standing on ladders writing calculations on a gigantic blackboard. I knew from all of the publicity around the film, “Hidden Figures,” that there were a number of unsung women who worked on the moon landing, including some who helped calculate the trajectory the lunar module would need to make the landing. Using the Life magazine photo as inspiration, I decided to replace the men with the women who were until recently, hidden from view.

My original sketch

This is before I decided to have the blackboard fill the background

In this step I added another woman and filled the background with the green of the blackboard

Since this challenge was supposed to celebrate the Moon landing, I knew I wanted to have the Moon somewhere in my design. My first idea was to have the blackboard floating against a dark blue sky, but after roughing out a sketch and trying it as a repeat, the rectangle of the blackboard seemed to interrupt the flow of the pattern so instead I decided to eliminate the sky and make the entire background be a giant blackboard (or in the case of my design, a greenboard). I decided I would make the Moon look like a chalk drawing on the board.

I created my drawing using Corel Painter 12. Painter has wonderful brushes that emulate all sorts of natural media, including chalks which were perfect for creating the elements drawn on the board. For the drawings of the women, I used some of Painter’s pen brushes, mainly the flat color pen and the scratchboard pen. Before I began drawing on the computer, I made a quick pencil sketch of my design.

Using illustrations of the rocket that carried the lunar module for reference, I drew a simplified version of the rocket that I superimposed over the blackboard. Originally, I had the rocket placed at an angle, but I didn't like how it looked in the repeat so I ended up placing it upright, giving it a ready for launch look. I used a photo of the lunar module I found on Wikipedia as a reference for my chalk drawing of the module on the blackboard. For the formulas on the blackboard, I used some of the actual formulas shown in the Life magazine photo, re-drawing them using one of Painter’s chalk pens.

Finally, I added some curved dashed lines to represent the orbit and trajectory of the lunar module and added some scuffed out marks on the blackboard to make it appear as if certain parts of the board had been erased.

I named my pattern "Calculating the Moon," and I've been very happy with the wonderful response it has received. If you click on the link above, it will take you to my Spoonflower shop where you can purchase the design on fabric, wallpaper or gift wrap.

Pinterest images of the Apollo landing sites on the Moon

Google search results for Saturn V rocket